DMD 1680 has an Installed Fan Motor of 10 HP, whereas other reputed manufacturers offer Cooling Towers with either 15 HP or 20 HP motor for the same capacity.

The lower HP rating of the motor used in "Advance" towers therefore leads to a substantial saving in annual energy cost as illustrated below:

Therefore in Case No. 1 you will spend an extra RS 1,11,88/- p.a. and Case No. 11 RS 2,26,800/- p.a. on Electricity Bills if you choose to buy a tower with a higher HP motor rating as compared with "Advance". "Advance" are the only High Performance FRP Cooling Towers designed for long life and low maintenance at a competitive price. The money you save on maintenance and electricity bills make "ADVANCE" your best Cooling Tower investment from installation and years thereafter.

When you invest in "ADVANCE" Cooling Towers, you are assured of the following:

1.	Superior laminate strength, with Isopthalic Resin (ISO) reducing vibration and increasing tower life.
2.	Neopently Glycol (NPG) gelcoat finish for UV protection and color retention with improved surface finish.
3.	Auxiliary drain tank totally in corrosion resistant FRP.
4.	Fans, hubs and sprinklers in gravity die cast aluminum allow LM-6 together with dynamically balanced fan assemblies ensuring smoother operation, longer bearing and motor life.
5.	PVC fills made from vacuum formed virgin PVC sheets.
6.	Power saving leads to lower annual electric bills due to our direct drive motors with IP-55 protection and 'F' class insulation.
7.	Protection against malfunctioning parts including Motors through a 15 months warranty from date of your "ADVANCE" tower.